124
UNGO – Features and Technologies
position. This prevents damage to the starter
motor if the key is turned to the start position dur-
ing remote start operation.
Built-in Wait-to-Start Timer
Diesel vehicles need adequate time to warm
up the glow plugs prior to starting. When the
remote start is activated, the wait-to-start timer
will allow the glow plugs to properly warm up
before engaging the starter circuit. This feature
prevents damage to the motor and glow plugs
during remote start operation.
Comfort Closure
If programmed ON the door lock output will acti-
vate the Comfort Closure output for 20 seconds.
This output will begin 200mS after the final door
lock output has completed regardless of the door
lock programming. This feature is designed to
integrate with vehicle that can close the power
windows and sunroof by holding the key in the
driver door lock position, and will operate on both
single input systems and two pulse dead bolt
systems.
Dome Light Supervision Output
The dome light will illuminate for 30 seconds each
time the system is disarmed using the remote
control. This is useful for seeing inside the vehicle
at night prior to entering it.
Dual Stage Impact Sensor
A sensor mounted in the vehicle that is designed
to pick up impacts to the vehicle or glass.
Depending on the strength of the impact, the
sensor can determine whether it’s an accidental
contact or actual violation attempt.
Event History Diagnostic
ProSecurity systems can provide notification that
the alarm was previously triggered. The status
LED will indicate which zone was involved. The
system will retain this information in its memory,
until the next time the ignition key is turned ON.
Extended Range Antenna
An optional external receiver/antenna used to
upgrade the remote/receiver performance in
areas of high radio interference such as military
bases, airports, and hospitals.
False Alarm Prevention
It prevents annoying repetitive sequences due
to faulty door pins switches or environmental
conditions such as thunder, jackhammers, airport
noise, etc.
Gasoline or Diesel Vehicle Compatible
ProSecurity remote start systems can be installed
into either gasoline or diesel vehicles.
Hyper Blue LED
A blue LED (Light Emmiting Diode) mounted at a
discretionary location inside the vehicle. It is used
to indicate the status of your system.
Individual Remote Recognition
Individual Remote Recognition makes it possible
to program different settings for each remote
that is used with the system. Then, whenever a
specific remote is used, the system will recall the
setting assigned to that remote. IDR lets up to
four users of the system have different settings
that meet their specific needs. It is almost like
having four separate alarms in your vehicle, one
for each user.
Keyless Entry
Allows for easy entry or exiting of the vehicle with-
out having fumbling around for keys. May require
additional parts and labor.
Over and Under Rev Protection
The system monitors the engine speed and will
automatically shut the engine off if the RPMs rise
above or fall below the programmed levels. This
feature prevents damage to the motor due to fuel
delivery system failures or other problems, which
may cause the engine to race.
Programmable Override Sequence
ProSecurity systems can be programmed to
(13 strony)
(155 strony)
(47 strony)
(2 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji